Saturday, November 14, 2026

How to hide the thread tails on your quilt

Dianna and I show you how to tuck the last knot into the batting. Try it on a scrap tonight. ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏  ͏ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­ ­
Close-up portrait of a person with short dark hair, wearing a dark jacket and a blue shirt with small white dots; the face fills most of the frame, wi...

LINDA’S ELECTRIC QUILTERS

Evenings with Corey

Where do the thread tails go?

A quilting lesson from Corey Pearson, Chief Quilter

Hi bestie,

Ever finished a beautiful line of stitching and found two long threads waving at you? Leave those tails for a minute. With a hand needle, you can tuck them inside the quilt so the last stitch is the only thing anyone sees.
Close-up view of black fabric with white stitched concentric loops and curved decorative lines, bordered by deep red textured fabric; a hand is visibl...
Watch Dianna and me bury the threads →

Try it on a scrap sandwich

Layer two fabric scraps with a little batting between them. Stitch a short line and leave several inches of both threads at the end.
STEP 1
Bring the tails together. Give the top thread a gentle tug at the last stitch. A loop of bobbin thread will peek through. Catch the loop with your needle and draw the free end up to the top.
STEP 2
Tie a small knot. Hold the two tails together and tie an overhand knot close to the last stitch. Keep the fabric flat as you snug it up. Thread both tails into a hand needle.
STEP 3
Travel inside the batting. Take the needle back into the last stitch hole. Slide it sideways between the layers for about an inch, then bring it out through the top. Tug gently until the knot slips beneath the surface. Snip the tails at the exit point so the ends settle inside.
A flat instructional diagram on a pale cream background shows a side view of three horizontal quilt layers: a thin green top, a thick tan middle, and ...

Flip it over and check

The back should show only your stitching. If a long thread crosses the back, your needle went through all three layers. Before you trim, back the needle out and take a shallower path. Try it twice on your sample before moving to your quilt.
For your next practice line, sew the same curve at two stitch lengths and see which one you like. Read my stitch-length tip.

Happy quilting,
Corey Pearson
Chief Quilter · Linda’s Electric Quilters
P.S. An ordinary hand needle works. If threading two tails is the fiddly part for you, Linda’s carries self-threading needles.
A square, flat geometric pattern arranged in a repeating grid of triangles and diamond-like shapes in teal, muted red, mustard yellow, and pale cream,...

COREY’S QUILT BEE · BETA

Which block would you try?

Come build a quilt with me, then put your design up for sale in your virtual quilt shop.

Play Quilt Bee →
The logo for Linda's

HomeSales and DealsMorning with Corey

Linda's · 2001 Central Circle Suite 103, McKinney, TX 75069 US

Unsubscribe

No comments:

Post a Comment